PCCrafts.com - Transfer Paper

Transfer Paper

INKJET TRANSFER PAPER

Application of transfers to shirts, bags, and similar material. These directions can be applied to almost any type of transfer paper.

Step 1

Design your print.

Print the image in reverse.

Make a test print on plain paper.

Step 2

For best results, we recommend the

following settings: Photo Quality on Plain Paper

Step 3

Next, you cut the print off the sheet.

Step 4

For best results, cut close to the edge of the transfer in order to reduce the "ironed on" look

Step 5

Now let the iron warm up. Use a high setting with no steam.

Step 6

The next step is to lay out the transfers on the shirt.

Step 7

Now you iron. This is about the most important step. You must use lots of PRESSURE and lots of HEAT.

Step 8

The next step is to peel the backing of the transfer. With the "cold peel" transfer paper, you can peel the back either hot or cold.

Step 9

Peel the back hot for a matte finish.

Peel the back cold for a glossy finish.

Step 10 Once you are finished, be sure to read the directions for caring for your finished product.

Click on the Store to order your supplies

Set as favorite

Bookmark

Email This

Comments (0) Add Comment

Write comment