Now you can make your own customized clocks!!!

Step 1 Start by drawing a circle on the page. For the small clocks, draw a 7" diameter circle. For the large clocks, draw a 8" diameter circle. Now center the circle on the page both vertically and horizontally.

Step 2 Now place the numbers to your clock face around the edge of the circle. Many people insert graphics in place of the numbers.

Step 3 The next step is to make a test print on plain paper.

Step 4 Pay attention because this is the most important part!!! Get a good light source such as a desk lamp. Lay one of the perforated clock faces over the test print you made over earlier. Compare where the numbers are with the clock face. Check the accuracy of your print. Save the file at this point and retain it as a template for future clocks. If you are satisfied, you can now finish the design of the face.

Step 5 The last two steps to making a face are designing the print and deleting the circle that was first drawn.

Step 6 This is the final print. The perforated face is now carefully removed from the page.

Step 7 Now open the clock and take it apart.

Step 8 Use a knife to pry open the cover.

Step 9 We do not recommend using any adhesive to on the face. The notch and the cover will hold it in place!!

To purchase this product click here!

Comments (0)

Subscribe to this comment's feed